Steel Specifications At A Glance: What Are The Specifications Per Ton?

Jul 19, 2025

Leave a message

I. Steel Specifications

1. H-Beam: 100x100mm, 125x125mm, 150x150mm, 175x175mm, 200x200mm, 250x250mm, 300x300mm, 350x350mm, 400x400mm, etc.

2. I-Beam: 100mmx50mm, 125mmx65mm, 150mmx75mm, 200mmx100mm, 250mmx125mm, 300mmx150mm, etc.

3. U-Beam: 50mmx25mm, 75mmx40mm, 100mmx50mm, 125mmx65mm, 150mmx75mm, 200mmx90mm, etc.

II. Flat Steel Specifications

1. Specifications include 20×2.5, 25×2.5, 30×2.5, 35×3, 40×3, 50×3, 60×4, 70×5, 80×6, 100×8, and 120×10.

2. Ribbed flat steel includes specifications such as 10×3, 12×4, and 16×5.

III. Angle Steel Specifications

1. Specifications include 20×20×3, 25×25×3, 30×30×3, 35×35×3, 40×40×3, 50×50×4, 63×63×6, and 80×80×8.

2. Equal-leg angle steel in sizes from 5# to 25#.

IV. Pipe Specifications

1. Rectangular pipe: Specifications range from 20*10mm to 600*400mm.

2. Round Tube: Outer diameter Φ21.3mm to Φ820mm, wall thickness 1mm to 50mm.

3. Square Tube: Specifications 10mm×10mm to 400mm×400mm.

The above are only common steel specifications. The actual specifications will depend on the specific application scenario. When selecting steel, factors such as project requirements and implementation standards should also be considered.

Send Inquiry