Introduction To Several Common Saw Blade Models

Jul 07, 2025

Leave a message

1. Carbide Circular Saw Blades: The Main Force for Metal and Wood Cutting
1. Model Features:

- Material: Tungsten-cobalt carbide tip (commonly YG8 and YG6X), base steel: 65Mn spring steel.

- Tooth Profile: Alternating Bevel (BTA) for wood, Trapezoidal (TC) for aluminum, and Flat (FT) for plastic cutting.

- Size: Outer diameter 100-600mm (commonly 180mm and 255mm), thickness 2.0-3.2mm, number of teeth 24-120.

2. Applications:

- Woodworking (high-tooth models, such as 100 teeth) for cutting density board;

- Metalworking (40-60 teeth) for cutting aluminum profiles. Recommended speed: 3000-5000 rpm (Source: Machining Handbook, 5th edition).

II. Diamond Saw Blades: For Concrete and Stone
1. Core Parameters:

- The blade contains diamond particles (30%-50% concentration), and the base is high-strength steel.

- Categories: Continuous Edge (dry concrete cutting), Turbine (wet granite cutting).

- Typical Sizes: 350mm diameter (wall saw blade), 230mm diameter (angle grinder blade), with a cutting depth of up to 100mm.

2. Industry Applications:

- Building Demolition (large diameter blades over 350mm);

- Tile Cutting (small diameter 110mm). Water cooling is required to prevent overheating.

III. High-Speed Steel Saw Blades: Precision Thin-Wall Tube Cutting
1. Performance Advantages:

- Material: W18Cr4V or M2 high-speed steel, hardness HRC 62-65.

- Thin Design: Thickness 0.9-1.2mm, reducing material loss.

Tooth pitch: 6-12mm (fine teeth for cutting copper tubes, coarse teeth for cutting PVC).

2. Usage Notes:

- Suitable for low-speed cutting (<800 rpm). Cutting fluid is required to extend tool life.

Send Inquiry