The FNC-650 automatic circular saw blade sharpening machine boasts user-friendly operation and an intelligent interface. Its well-designed internal structure also allows for efficient space utilization, making it highly praised by customers worldwide.
Today, I would like to highlight the advantage of its simple operation. Below is the Operation Tutorial:
Step 1: Power On
Wait for the screen to load completely

Press the "Reset" button
Ensure the X-axis, Y-axis, and Z-axis return to their origin points
Step 2: Press the "Sharpen new tooth" Key
Enter the parameters of the saw blade and grinding wheel to be processed in the "Open Teeth" interface.

Step 3: Press the "Start Setting" Key
The work-piece axis will move to a safe distance based on the input parameters.
Install the saw blade and secure it tightly.
Step 4: Press the "Working Mode" Key and Select "Step by Step" Mode. Press the "Grinding Wheel"Key.
Press the upward arrow key "▲" ,until sparks appear during the grinding of the saw blade.
Raise the blade by approximately 0.6 mm (press the "▲" key6- 7 times in step-by-step mode).
Press the "Setting stop" key, and the Z-axis will move downward to a safe distance.
Press the "Grinding Wheel" key to stop the grinding wheel.
Close the door and press the "Start" key to begin the operation.
Note: If the machine has not been Reset, opening teeth for the next saw blade of the same specifications and parameters does not require re-tooling. Simply press "Start" directly.

If you want to improve processing efficiency and better reduce costs, here are methods to increase gear grinding speed.
Adjust the value in "Sharpening Speed 1" under the mechanical parameters.
After making the change, return to the grinding interface to see that the " Sharpening Speed " has increased.
Note:
The Sharpening Speed change will only take effect after returning to the " Sharpen new tooth " interface.
If you are interested in circular saw blade sharpening machine, please feel free to contact us.



