Circular Saw Blades for Stainless Steel

Circular Saw Blades for Stainless Steel

Premium HSS Circular Saw Blades for cutting Stainless Steel.
Send Inquiry
Add To Inquiry
Description

Product details

 

  • CRAL-Coated HSS Saw Blades for Stainless Steel – 30% Longer Life Guaranteed
  • Premium HSS Circular Saw Blades for cutting Stainless Steel. 
  • Han-li Saws specializes in high speed steel circular saw blades engineered specifically for stainless steel machining, delivering exceptional cut quality, extended tool life, and cost efficiency in industrial applications.

 

Why choose our circular saw blades of stainless steel?

 

China's 1st HSS saw blade manufacturer (est. 2000) 

Compared to standard HSS blades, our production process implements stricter quality controls for superior performance:

For example

Run-out

 

To cutting Ordinary pipe material

To cutting stainless steel

450*2.5mm

≤0.23

≤0.15

450*3.0mm

≤0.23

≤0.15

500*3.0mm

≤0.26

≤0.18

 

Run-out is one of the key guarantees for achieving a clean, burr-free cut on the material.

  • automatic circular saw blade sharpening machine independently designed and developed (Chamfer angle and accuracy: 45°±1°, ±0.05mm)
  • Unique coating formulation-- Exclusive Technology for Superior Cutting Performance
  • Using the best base material: HSS M35 and HSS M42.Proven Longevity – more than 30% lifespan vs. standard HSS blades.
  • Han-li Sawing Industry has always attached great importance to exploring new technologies, researching new processes, and developing new equipment. It has 32 full-time R&D personnel, accounting for 20% of the total number of employees.

 

Tooth Pitch Calculation Recommendations

Given the cutting characteristics of 304/316 austenitic stainless steel (high toughness, strong adhesion, and pronounced work-hardening tendency), tooth selection should follow the principle of "dense teeth for thin materials, coarse teeth for thick materials."

It is recommended to estimate tooth pitch using the empirical formula: Tooth pitch ≈ Workpiece diameter / 3.5, with adjustments made according to wall thickness. After calculation, round the tooth count to the nearest multiple of 20 to conform to standard saw blade specifications.

General recommendations are as follows:

Thin-walled tubes (wall thickness ≤ 2mm): Denser teeth are recommended to reduce vibration and burrs. For example, for a 350×2.0mm blade cutting 10–38mm outer diameter tubes with wall thickness ≤ 2mm, 240T–260T is recommended.

Thick-walled tubes (wall thickness > 3.5mm) or solid bars: Coarser teeth are recommended to ensure sufficient chip evacuation space, avoiding chip jamming that can cause blade overheating or tooth clogging.


Coating Wear Resistance

Given the high-temperature toughness and abrasiveness of stainless steel, high-performance PVD coatings are recommended to significantly enhance tooth tip wear resistance and tool life:

TiAlN / AlTiN coating: Features high hardness (HV 3000–3500) and excellent high-temperature oxidation resistance (withstands up to 900°C), with a low friction coefficient. It is particularly suitable for stainless steel and high-tensile materials under dry or insufficient cooling conditions. Actual field data shows that M42 substrate combined with TiAlN coating can extend blade life by over 30%.

TiCN (Titanium Carbonitride) coating: Offers a hardness of approximately HV 2500–3000 and heat resistance up to 400°C, with an extremely low friction coefficient that effectively reduces cutting heat and chip adhesion. It is recommended for high-speed stainless steel cutting applications.


Anti-Adhesion / Chip-Welding Prevention Design

The common "chip welding" phenomenon (chips adhering to the tooth tip) encountered during 304/316 stainless steel machining is a primary cause of tool failure. This series of saw blades enhances anti-adhesion performance through the following design features:

Optimized tooth profile design: For thin-walled tubes, the BW-type tooth profile (alternate bevel teeth with 1/3 chamfer) is adopted; for thick-walled tubes or solid bars, the HZ-type tooth profile (high-low teeth) is used. These designs ensure smooth chip evacuation and reduce contact friction between chips and the tooth face.

About HAN-LI Saws

 

Zhejiang Jinyun Hanli Saws Co., Ltd., established in 2000, is China's first manufacturer of HSS circular saw blades for metal cutting. Serving metal working industries in 40+ countries since 2000.
After years of accumulation and development, the company's current business scope covers: high speed steel saw blades and cutting tools, saw blade sharpening machines, special steel strips & coils, shaped special steel, , special steel sheets, Heat - treatment business, PVD / DLC coatings and other vertical fields, fully meeting market and customer needs.
It is our eternal principle to protect our partners ' interests. Our target and direction is to become a century-old company.

 

Certificate of Honor

 

0486

 

product-380-502

 

product-380-502

 

product-1600-2262

 

product-1460-720

 

 

Packaging

product-1522-1218
product-1522-1218
 

Hot Tags: circular saw blades for stainless steel, China circular saw blades for stainless steel manufacturers, suppliers, factory, High Speed Steel Saw Blades, Circular Saw Blades for Stainless Steel, HSS Circular Saw Blades, HSS Blades, Hss Cut Off Circular Saw Blade, Hss Circular Saw Blade for Metal

Send Inquiry